Surf Pro Guides

How to Prepare a Surface Before Painting with TSPe

How to Prepare a Surface Before Painting with TSPe

The Surf-Pro demonstration

Watch the brand’s video. The written steps below complement this short demonstration; always follow your product label. View on Instagram ↗

A freshly painted wall or refinished cabinet doors start with preparation. Dust, fingerprints and grease need to be removed using a method suited to the material and its finish.

This checklist walks through pre-paint cleaning using the directions on Surf-Pro TSPe ready-to-use spray, 500 ml.

1. Identify the material and finish

A painted wall, a cabinet door, bare wood and exterior siding may require different preparation. Check the surface material and review the paint manufacturer’s guidance. When in doubt, test a small, inconspicuous area before treating a larger section.

2. Clear the work area and remove dust

Move objects out of the way and protect nearby surfaces. Remove loose dust and debris with tools appropriate for the material. This helps avoid spreading dirt when you wipe with a damp cloth.

3. Clean with ready-to-use TSPe

TSPe spray and TSPe concentrate are different formats. The directions here apply to the ready-to-use 500 ml spray. Its rear label is available in the product gallery.

  1. Spray the compatible surface to be cleaned.
  2. Wipe with a damp cloth.
  3. Remove excess solution.

The label gives the same process for kitchen cabinet doors and counters. It states that no rinsing is required for pre-paint cleaning on interior or exterior surfaces. Always follow the directions on the bottle you are using.

4. Inspect and let dry

Check corners, edges around handles and frequently touched areas. Remove visible residue without scrubbing so hard that the finish is damaged. Let the surface dry before moving on to the remaining preparation steps for your chosen paint.

5. Complete the rest of the preparation

A degreased surface is not automatically ready for paint. Repairs, sanding and primer depend on the material and paint system. Follow the manufacturer’s recommendations and remove any fresh dust created by sanding.

Surf-Pro TSPe 500 ml with painting supplies

The ready-to-use format

A 500 ml spray for adding surface cleaning and degreasing to your painting preparation routine.

Explore TSPe →

Your pre-paint checklist

  • The material and finish have been identified.
  • The product has been tested in an inconspicuous area.
  • Dust, dirt and excess cleaner have been removed.
  • Necessary repairs and sanding are complete.
  • The surface is dry and the primer suits the material.

Frequently asked questions

Should TSPe spray be diluted?

This guide covers the ready-to-use spray. For TSPe concentrate, follow the directions for that separate format.

Do I need to rinse after TSPe?

The photographed spray label says to remove excess solution, with no rinsing required. Also check the requirements of the surface and paint manufacturer.

Does TSPe replace primer?

No. TSPe is used for cleaning. Primer, repairs and sanding are separate decisions based on the project.

Read the bottle label
Surf-Pro TSPe 500 ml rear label

View the application directions, precautions and first aid information on the rear label of ready-to-use TSPe 500 ml.

Open the full-size label ↗

Always follow the label on the package you are using.

For another project, read our guide to replacing an old silicone joint, or explore Surf-Pro.

Keep exploring: all Surf-Pro tips & tricks or shop the Surf-Pro collection.