Replacing a silicone joint starts with preparing the area underneath it. Before applying a new bead, inspect the old joint, choose a method compatible with the surface and remove residue according to the directions of the products being used.
This guide helps you plan that stage with Surf-Pro Silicone Buster 110 ml, designed to remove dried silicone.
1. Check the joint and the surface
Identify the material underneath the silicone. The material and its finish determine which products and tools are appropriate. Review the surface manufacturer’s instructions. A loose joint or damaged surface requires suitable preparation before new silicone is applied.
A photograph of a darkened joint cannot establish the condition underneath it. If you notice a moisture problem or damaged material, have the cause assessed before simply covering the area.
2. Prepare the work area
Clear the edge of the bathtub, shower or other area. Protect neighbouring surfaces and choose removal tools that will not scratch the material. Follow the remover’s precautions and the surface manufacturer’s instructions.
3. Use a product intended for silicone
Silicone Buster comes in a 110 ml bottle with a nozzle for targeted application. Test in an inconspicuous area before treating a visible section.
For the amount to apply, contact time, residue removal and any repeat application, follow the full directions on your package. Keep the package close while you work so you can refer to its directions and precautions.
4. Remove residue carefully
Work gradually with compatible tools recommended for the surface. Avoid forcing the tool or using a metal blade without first checking whether it is appropriate for the material. Complete residue removal and final cleaning according to the remover’s directions.
5. Prepare for the replacement joint
Check that the area is clean, dry and free of the residue that the manufacturers require you to remove. The new silicone has its own directions for surface preparation, application and the wait before exposure to water.
The silicone removal step
View the bottle photographs, label precautions and product information for Silicone Buster 110 ml.
Your checklist before replacing the joint
- The material and finish are identified.
- The remover is compatible with the surface.
- A small, inconspicuous test has been completed.
- Residue has been removed according to the directions.
- The surface is prepared for the chosen replacement silicone.
Frequently asked questions
Is Silicone Buster for routine joint cleaning?
It is designed to remove dried silicone. For routine bathroom cleaning, choose a product suited to the surfaces and joints you want to preserve.
What contact time should I use?
Follow the full directions for your product and respect the stated application time. Do not leave the product in contact with the surface longer than instructed.
Can I apply new silicone straight away?
Follow the remover’s cleaning and drying requirements, then the new silicone’s instructions. The wait before using the shower also depends on the chosen sealant.
Read the bottle label
Also read our shower cleaning guide and our surface preparation checklist before painting.
Keep exploring: all Surf-Pro tips & tricks or shop the Surf-Pro collection.
Share











